LASER FacialPure 5.0 Ultra, Briljantzwarte technologie Dubbele handgreep Niet-invasieve laser Picosecond-machine met trekstang en katrol, wenkbrauwverwijderaar en tatoeageverwijderaar
- days
- :
- hours
- :
- min
- :
- sec
- * 【Dubbele handgreep】Dankzij de aparte Pico-second- en Ice-Hammer-handstukken kunt u direct wisselen tussen krachtige pigmentstralen en een kalmerende afkoeling. Zo ervaart u een soepele klantervaring en maximaliseert u de behandelresultaten.
- * 【Alles-in-één systeem met zes koppen】Van niet-invasieve 1064nm/532nm en laser 1064nm/532nm tot Black-Face, Eyeliner en Ice-Cool-sondes: u kunt wenkbrauwen, tatoeages, pigmentatie en verjonging aanpakken met één apparaat, waardoor u geen extra apparatuurkosten heeft.
- * 【Draagbaarheid met ingebouwde wielen】Het apparaat reist moeiteloos tussen klinieken, spa's of huis.
- * 【Ultrahoog vermogen en stabiele prestaties】5000 W piekvermogen en een Pre-Ignition Stabilizer zorgen voor snelle energie-uitbarstingen voor snellere pigmentfragmentatie, kortere sessies en een langere levensduur van de lamp.
- * 【Echte niet-invasieve precisie en geen hersteltijd】Geen snijwonden, geen bloedingen, geen blaren, alleen Red-Vine nauwkeurige positionering om pigmentdoelen te bereiken zonder fouten.
Hoe te gebruiken?
Het instrument moet met water gevuld worden voordat u het inschakelt:
1. Open het overloopgat
2. Plaats de trechter in het watervulgat en voeg gedestilleerd of gezuiverd water toe (om verstopping van het wateruitlaatgat te voorkomen)
3. Als er water uit het overloopgat lekt, betekent dit dat het instrument vol water zit. Stop met het bijvullen van water en draai de moer terug op het overloopgat.
4. Schakel het instrument in voor gebruik
Tip: Als u het instrument dagelijks gebruikt, voeg dan elke twee maanden water toe. Als u het niet dagelijks gebruikt, voeg dan elke maand water toe. Vervang al het water in het instrument elke twee maanden.
Wenkbrauwen wassen en voorzorgsmaatregelen
1. Reinig het operatiegebied. (Voor het wassen van de wenkbrauwen moet je een dikke laag gel aanbrengen om witte wenkbrauwen te voorkomen)
2. Was vanaf het uiteinde van de wenkbrauwen, veeg met een wattenstaafje over de wenkbrauwen en de huid zal wit worden. Veeg na de operatie de gel schoon, breng erythromycinezalf aan, wikkel er plasticfolie omheen en leg er 15 minuten ijs op.
3. Als de huid na de operatie niet beschadigd is, is het raadzaam om na ongeveer 24 uur water aan te raken. Als de huid beschadigd is, mag deze geen water aanraken voordat de korst is gevormd en hersteld. Breng na het korstje erytromycinezalf aan om infectie te voorkomen. Als de huid niet beschadigd is, maar wel wat roder en gezwollen is, koel de huid dan de eerste drie dagen één keer, telkens 15 minuten.
4. Normale wenkbrauwkleuren worden dicht bij de huid aangebracht, trek de afstand niet, test het dicht bij de huid om te zien of de huid wit wordt, zo niet, til het dan 0,5 cm op en het maximum mag niet meer dan 1 cm bedragen
5. Wenkbrauwen wassen kan slechts één keer worden gedaan en kan niet worden herhaald. Herhaald gebruik kan zwelling of bloeding veroorzaken.
6. De frequentie van de wenkbrauwwasmachine mag niet te hoog staan. Als de snelheid te hoog is, verschijnen er witte wenkbrauwen. Als de wenkbrauwen wit zijn, breng dan 48 uur lang zoutoplossing aan en ze zullen herstellen.
7. Het is niet aan te raden om eyeliner te gebruiken. Oefen met eyeliner pas als je bedreven bent in het wassen van je wenkbrauwen.
8. Controleer of de huid ontstoken is voordat u uw wenkbrauwen wast. Als u een litteken of een allergische reactie heeft, moet u het met voorzichtigheid gebruiken. Het is niet geschikt voor patiënten met diabetes en hartaandoeningen.
9. Houd het te behandelen gebied schoon en vermijd wrijving en infectie. Tijdens de periode van roodheid en zwelling kan erytromycine worden gebruikt. Breng erytromycinezalf 1 tot 2 keer per dag aan om infectie te voorkomen. Het is niet raadzaam om zware lichamelijke inspanning te verrichten voordat de korst eraf valt (om infectie na zweten te voorkomen), geen make-up te dragen, niet over de huid te wrijven, geen gezichtsmaskers te gebruiken, geen alcohol te drinken en aspirine te vermijden. Let op de zonbescherming, anders kan er pigmentatie optreden en kunnen er na een infectie littekens ontstaan.
Voor welke mensen is het af te raden om hun wenkbrauwen te wassen?
1. People who have washed eyebrows many times: because the epidermis and dermis become thinner, the relative risk of washing eyebrows is also higher
2. People who are particularly prone to scarring: People who are prone to scarring on their bodies are prone to scarring or leaving scars, so it is not recommended to wash eyebrows
3. People with deep eyebrow tattoos: People who have deep eyebrow tattoos are not suitable for eyebrow removal. General eyebrow removal machines usually cannot handle it very effectively and the effect is not good
4. People with obsessive-compulsive personality tendencies: People with obsessive-compulsive personality tend to be nervous, anxious, eager to do well and have high demands on themselves. Therefore, even if they are very successful, they will still be dissatisfied
Tattoo removal operation and precautions
1. The recommended distance between tattoo removal and skin is 1-3 cm
2. Tattoo removal is not recommended for those who have had a tattoo for less than one year, and the effect will not be ideal
3. Before tattoo removal, use more than 75% medical alcohol to clean the skin, because there is a stratum corneum and dirt on the skin, so it is not easy to get infected after washing
4. If you can tolerate the pain of tattoo removal, do not apply anesthetics. Anesthetics are easy to proliferate. After tattoo removal, you can apply erythromycin ointment and ice for 15 minutes to prevent blistering and infection
5. When removing tattoos, you can only apply it once at the tattoo site, and you cannot apply it repeatedly
6. The tattoo will scab about 2 days after washing. Remember not to touch water before the scab forms. The scab must fall off naturally and cannot be picked off by hand to prevent scars!
7. After tattoo removal, you can choose to take oral anti-inflammatory drugs for 2-3 days and external repair products to assist skin metabolism
8. Avoid sun exposure and sweating after washing. Avoid spicy foods and dark foods such as soy sauce
9. The interval between tattoo removal is recommended to be more than 30 days, depending on the recovery situation
Precautions after freckle removal
1. The recommended distance for freckle removal is 1-2cm
2. After freckle removal, the skin may be red and swollen due to the energy irradiation, but this is normal. Sometimes there will be a slight heat sensation, but it will subside quickly.
3. After freckle removal, apply anti-inflammatory cream every day. The wound will slowly form a scab and fall off after about a week. At this time, the skin will be pink. During this process, pay attention to keep clean and avoid sun exposure, otherwise it will affect the effect of freckle removal.
4. If the pigment has not completely subsided after freckle removal, you don’t have to worry. You can have the next treatment in about 1 month.
5. Pay attention to continuous sun protection after surgery, eat less greasy and spicy food, keep a happy mood, and do not use whitening and irritating functional products.
6. On the 1st to 4th day after surgery, pay attention to "repair" work (apply growth factors), try not to touch water, use saline or distilled water to wipe, keep the treatment area clean and fresh, and apply some repair ointment.
7. Do not steam sauna or do strenuous exercise within seven days. Do not eat irritating and pigmented foods within seven days, such as coriander, celery, leek, spinach, chocolate, coffee, soy sauce, and prohibit smoking and drinking.
8. If there is scab, do not pick it with your hands, and do moisturizing care after ten days.
9. After a week, the wound will begin to scab and fall off. At this time, sun protection is an absolutely necessary step. Wear SPF30+ sunscreen when going out, and protect against the sun for at least 3-6 months.
Black Face Doll: It mainly has the effects of whitening, removing yellowness, controlling oil, and shrinking pores. A course of treatment is 3 to 5 times, and it can be done once a month.
1. After cleansing, apply a thin layer of gel (the gel should not be applied too thickly, as it will absorb light, and it will feel hot and tingling during operation, and it is difficult to blast and easily clog pores). After applying the gel, wait for the gel to dry before operating.
2. During operation, replace the black black face doll special operation head with energy between 200 and 500, mainly depending on the blasting force (the degree to which the gel can be blasted cleanly), 1-2cm away from the skin, and the frequency is 2~5hz (2hz is recommended for novices)
3. One part can only be applied once, not multiple times. Each part must be operated, and it cannot be applied casually, otherwise the blasting will not be clean and affect the effect
4. After the black face doll, you can wash your face with clean water after five minutes, and then apply a moisturizing mask, and then you can do normal skin care, and hydrate more in the later stage.
Probe function:
Non-invasive 1064nm red probe:
For washing black and blue eyebrows, eyeliner
Energy: 200-300mj, frequency: 1-3hz
Non-invasive 532nm blue probe:
Washing red, brown and coffee eyebrows
Energy: 200-300mj, frequency: 1-3hz
Minimally invasive 1064nm (colorless) probe:
Washing black and blue tattoos, removing deep spots
Tattoo removal energy: 300-600mj
Freckle removal energy: 600-10 00mj
Frequency: 1-3hz
Minimally invasive 532nm (colorless) probe:
Remove colored tattoos, remove shallow spots
Tattoo removal energy: 300-600mj
Spot removal energy: 600-1000mj
Frequency: 1-3hz
Black face doll probe:
Whitening, yellowing, oil control, shrink pores
Energy: 200-500mj, frequency: 2-5hz
Eyeliner Probe:
Remove eyeliner
Energy: 200-400mj, frequency: 1-3hz
CAUTION
1. Keep the pedal pressed and do not release it, not one step at a time, this design is safer!
2. Practice on A4 paper before use. You can use a pen to blacken and operate the instrument on the black text
3. Be careful not to switch on and off at will, it is very dangerous!
4. Women cannot use it during menstruation
5. Het wordt afgeraden om het apparaat zelf te bedienen. Draag een oogmasker om oogletsel te voorkomen.
6. Voor het eerste gebruik moet de watertank gevuld worden met water
Specificaties:
Pulsenergie: 500-2900MJ
Pulsbreedte: 3-20NS
Frequentiesnelheid: 1-10 Hz
Spanning: 110V-240V
Vermogen: 5000W
Golflengte: 1064nm/785nm/532nm
Gewicht: 10 kg
Afmeting: 46*34*36CM
Paklijst:
Picosecondemachine*1
Handvat*1
Trechter*1
Pedaal*1
Veiligheidsbril*1
Oogbescherming*1
Operatie Hoofd*6
Handleiding*1